Vitamin E Cosmetic Emulsification Case
A documented cosmetic formulation reference for reducing particle size in a Vitamin E system.
Application Goal
The Vitamin E formulation required a finer distribution to support emulsion uniformity. Control of temperature and stability assessment remain material-dependent validation steps.
Material and Challenge
PT-20 is suitable for laboratory formulation screening. PTH-20 can be evaluated when the process requires a microfluidic configuration discussion.
Recommended Equipment
The published comparison identifies treatment at 1200 bar for four passes.
Process Outline
The reported D50 changed from 2.802 μm before treatment to 0.465 μm after treatment, representing an 83.4% reduction. Reported D90 changed from 6.000 μm to 1.243 μm.
Documented Result
Related Product
The recommended equipment is listed below for further review. Final model selection should be confirmed against material properties, throughput, pressure target, and validation requirements.
Discuss Your Process
Share your formulation or material system, target output, and available validation data with the CAS PETER team.